blog:freenas_11.2-u5_and_10gbe

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
blog:freenas_11.2-u5_and_10gbe [2019/08/23 14:31] brettblog:freenas_11.2-u5_and_10gbe [2019/08/23 14:36] (current) brett
Line 54: Line 54:
 Aug 22 19:52:55 ale kernel: mlx4_en: mlxen0: Initializing port Aug 22 19:52:55 ale kernel: mlx4_en: mlxen0: Initializing port
 </code> </code>
-ifconfig output for the device of course at this point it's not configure with an IP but the status is "ACTIVE" and the switch can see it too.+ifconfig output for the device. Its alive and happy.
 <code> <code>
-root@ale[~]# ifconfig mlxen0 +mlxen0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu   1500 
-mlxen0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 +        options=ad00b9<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN  _HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6>
-        options=ed07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>+
         ether 00:02:c9:51:35:34         ether 00:02:c9:51:35:34
         hwaddr 00:02:c9:51:35:34         hwaddr 00:02:c9:51:35:34
 +        inet 192.168.1.22 netmask 0xffffff00 broadcast 192.168.1.255
         nd6 options=9<PERFORMNUD,IFDISABLED>         nd6 options=9<PERFORMNUD,IFDISABLED>
-        media: Ethernet autoselect (autoselect <full-duplex,rxpause,txpause>)+        media: Ethernet autoselect (10Gbase-SR <full-duplex,rxpause,txpause>)
         status: active         status: active
 root@ale[~]# root@ale[~]#
  • blog/freenas_11.2-u5_and_10gbe.txt
  • Last modified: 2019/08/23 14:36
  • by brett