Differences

This shows you the differences between two versions of the page.

--- blog:freenas_11.2-u5_and_10gbe [2019/08/23 14:28] – brett
+++ blog:freenas_11.2-u5_and_10gbe [2019/08/23 14:31] – brett
@@ Line 1: / Line 1: @@
 ====== FreeNAS 11.2-U5 and 10Gbe ======
-This is just a note as I see a lot of posts out there saying use Chelsio cards for FreeNAS as they are well supported.  Well I tried this and yes the card was recognized but the DAC cable was not. I was using SPF+ CISCO Passive Twinax cable [[https://www.molex.com/molex/products/datasheet.jsp?part=active/0747521101_CABLE_ASSEMBLIES.xml&channel=Products|part 74752-9519]] connected to [[https://mikrotik.com/product/crs305_1g_4s_in|Mikrotik CRS305]] switch but the link would not activate.  I switched to a different 10Gbe card and presto.
+This is just a note as I see a lot of posts out there saying use Chelsio cards for FreeNAS as they are well supported.  Well I tried this and yes the card was recognized but the DAC cable was not.
+<code>
+Aug  9 18:45:00 ale cxgbc0: <Chelsio T310, 1 port> mem 0xfb881000-0xfb881fff,0xfb000000-0xfb7fffff,0xfb880000-0xfb880fff irq
+at device 0.0 on pci10
+Aug  9 18:45:00 ale kernel: PHY 0 i2c read of dev.addr a0.0 timed out
+Aug  9 18:45:00 ale kernel: PHY 0 i2c read of dev.addr a0.0 timed out
+Aug  9 18:45:00 ale cxgbc0: using MSI-X interrupts (9 vectors)
+Aug  9 18:45:00 ale kernel: found old FW minor version(7.10), driver compiled for version 7.11
+Aug  9 18:45:00 ale kernel: found old FW minor version(7.10), driver compiled for version 7.11
+Aug  9 18:45:00 ale cxgbc0: firmware needs to be updated to version 7.11.0
+Aug  9 18:45:00 ale cxgb0: <Port 0 10GBASE-R> on cxgbc0
+Aug  9 18:45:00 ale cxgb0: Using defaults for TSO: 65518/35/2048
+Aug  9 18:45:00 ale cxgb0: Ethernet address: 00:07:43:05:fe:ae
+Aug  9 18:45:00 ale cxgbc0: Firmware Version 7.10.0
+</code>
+Firmware update - I don't think this was necessary as the driver auto updates we just need a reboot
+<code>
+cxgbtool cxgb0 loadfw t3fw-7.11.0.bin
+Reboot
+</code>
+Next time around the firmware has been updated
+<code>
+Aug  9 18:55:44 ale cxgbc0: using MSI-X interrupts (9 vectors)
+Aug  9 18:55:44 ale cxgb0: <Port 0 10GBASE-R> on cxgbc0
+Aug  9 18:55:44 ale cxgb0: Using defaults for TSO: 65518/35/2048
+Aug  9 18:55:44 ale cxgb0: Ethernet address: 00:07:43:05:fe:ae
+Aug  9 18:55:44 ale cxgbc0: Firmware Version 7.11.0
+</code>
+The drive is plumbed into the kernel but the link won't come up to ACTIVE.
+I was using SPF+ CISCO Passive Twinax cable [[https://www.molex.com/molex/products/datasheet.jsp?part=active/0747521101_CABLE_ASSEMBLIES.xml&channel=Products|part 74752-9519]] connected to [[https://mikrotik.com/product/crs305_1g_4s_in|Mikrotik CRS305]] switch but the link would not activate.  I switched to a different 10Gbe card and presto.
 MNPA19-XTR | Mellanox EN ConnectX-2 1-Port 10GbE Network Adapter