Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
blog:freenas_11.2-u5_and_10gbe [2019/08/23 14:31]
brett
blog:freenas_11.2-u5_and_10gbe [2019/08/23 14:36] (current)
brett
Line 54: Line 54:
 Aug 22 19:52:55 ale kernel: mlx4_en: mlxen0: Initializing port Aug 22 19:52:55 ale kernel: mlx4_en: mlxen0: Initializing port
 </​code>​ </​code>​
-ifconfig output for the device ​of course at this point it's not configure with an IP but the status is "​ACTIVE" ​and the switch can see it too.+ifconfig output for the device. Its alive and happy.
 <​code>​ <​code>​
-root@ale[~]#​ ifconfig mlxen0 +mlxen0: flags=8943<UP,BROADCAST,​RUNNING,​PROMISC,​SIMPLEX,​MULTICAST>​ metric 0 mtu   ​1500 
-mlxen0: flags=8802<​BROADCAST,​SIMPLEX,​MULTICAST>​ metric 0 mtu 1500 +        options=ad00b9<​RXCSUM,​VLAN_MTU,​VLAN_HWTAGGING,​JUMBO_MTU,​VLAN_HWCSUM,​VLAN  _HWFILTER,​VLAN_HWTSO,​LINKSTATE,​RXCSUM_IPV6>​
-        options=ed07bb<RXCSUM,TXCSUM,​VLAN_MTU,​VLAN_HWTAGGING,​JUMBO_MTU,​VLAN_HWCSUM,​TSO4,​TSO6,​LRO,​VLAN_HWFILTER,​VLAN_HWTSO,​LINKSTATE,​RXCSUM_IPV6,​TXCSUM_IPV6>+
         ether 00:​02:​c9:​51:​35:​34         ether 00:​02:​c9:​51:​35:​34
         hwaddr 00:​02:​c9:​51:​35:​34         hwaddr 00:​02:​c9:​51:​35:​34
 +        inet 192.168.1.22 netmask 0xffffff00 broadcast 192.168.1.255
         nd6 options=9<​PERFORMNUD,​IFDISABLED>​         nd6 options=9<​PERFORMNUD,​IFDISABLED>​
-        media: Ethernet autoselect (autoselect ​<​full-duplex,​rxpause,​txpause>​)+        media: Ethernet autoselect (10Gbase-SR ​<​full-duplex,​rxpause,​txpause>​)
         status: active         status: active
 root@ale[~]#​ root@ale[~]#​