no way to compare when less than two revisions
Differences
This shows you the differences between two versions of the page.
— | blog:perle_-_serial_terminal_servers [2010/01/11 10:01] (current) – created - external edit 127.0.0.1 | ||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== Perle - Serial terminal servers ====== | ||
+ | |||
+ | ===== RJ45 to Sun server Netra PORT RJ45 ===== | ||
+ | |||
+ | < | ||
+ | Perle Sun | RJ 45 | ||
+ | RJ45 | ||
+ | Pin Pin | | ||
+ | 1 (DCD) Green White n/c | 1 Blue | ||
+ | 2 (DSR) Green --- 7 DSR | 2 Orange White | ||
+ | 3 (DTR) Orange White --- 2 DTR | 3 Brown | ||
+ | 4 (GND) Orange --------- 4 GND | 4 Orange | ||
+ | 5 (TXD) Brown White ---- 6 RXD | 5 n/c | ||
+ | 6 (RXD) Brown ---------- 3 TXD | 6 Brown White | ||
+ | 7 (CTS) Blue White ----- 8 CTS | 7 Green | ||
+ | 8 (RTS) Blue ----------- 1 RTS | 8 Blue White | ||
+ | </ | ||
+ | |||
+ | CS9000/ | ||
+ | Part #: 04024520 | ||
+ | |||
+ | CS9000/ | ||
+ | Part #: 04024500 | ||
+ | |||
+ | RJ45 serial port wiring info for Perle [[http:// | ||
+ | |||
+ | ===== Perle console bootup output ===== | ||
+ | |||
+ | This is the output from attaching a serial cable to the ADMIN port and powering on the unit. Hyperterminal set to 9600,8,N, 1 | ||
+ | |||
+ | At the login prompt try Username ' | ||
+ | |||
+ | < | ||
+ | Board id : 4300085R3.1 | ||
+ | ROM size : 1 x 1MB | ||
+ | RAM size : 2 x 2MB | ||
+ | Num ports : 8 | ||
+ | Diag codes : 01 03 04 06 06 06 06 06 06 06 06 06 06 06 06 06 06 | ||
+ | | ||
+ | | ||
+ | 33 35 2B 25 26 28 27 28 28 28 28 28 28 28 28 28 28 28 28 28 | ||
+ | 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 28 | ||
+ | 28 28 29 6A 6B 2C 32 37 3A 46 48 92 93 94 95 | ||
+ | Decompressing - ................................................................ | ||
+ | ................................................................................ | ||
+ | .........................................done | ||
+ | B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB INIT: booting... | ||
+ | |||
+ | INIT: parallel ports found: 1 | ||
+ | INIT: serial ports found: 8 | ||
+ | Time: 16: | ||
+ | File sytem has 30 blocks, 30 are free | ||
+ | INIT: TCP stack initialised | ||
+ | |||
+ | Perle JETSTREAM 4000 | ||
+ | Version 2.6.1.G | ||
+ | |||
+ | login: admin | ||
+ | password: | ||
+ | JS_4000# show hardware | ||
+ | mac address | ||
+ | board id | ||
+ | processor | ||
+ | uarts 1 * Serial ASIC | ||
+ | flash rom 1 x 1MB | ||
+ | ram 2 x 2MB | ||
+ | battery ram 32kB | ||
+ | serial ports 8 | ||
+ | parallel ports 1 | ||
+ | ethernet interface | ||
+ | ethernet speed auto | ||
+ | date | ||
+ | time | ||
+ | JS_4000# | ||
+ | </ | ||
+ | |||
+ | These images are for Board revision: 4300085R3.1 | ||
+ | |||
+ | {{perle: | ||
+ | |||
+ | Click for a full 1600x1200 resolution image | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Broken Perle Bootup ===== | ||
+ | |||
+ | < | ||
+ | Bootup dump from Admin (RS232) port : | ||
+ | |||
+ | Board id : 4300085R1.0 | ||
+ | ROM size : 1 x 1MB | ||
+ | RAM size : 2 x 2MB | ||
+ | Num ports : 8 | ||
+ | Diag codes : 01 03 04 06 06 06 06 06 06 06 06 06 06 06 06 06 06 | ||
+ | | ||
+ | | ||
+ | | ||
+ | </ | ||
+ | |||
+ | Note: The Diag codes above contains a couple of ' | ||
+ | |||
+ | |||
+ | ===== Trueport ===== | ||
+ | |||
+ | Trueport drivers install on Windows and create ' | ||
+ | |||
+ | To allow the Trueport drivers to connect to the Perle box, some commands must be run on the Perle box. | ||
+ | |||
+ | First, the details of the host that will connect need to be specified ... | ||
+ | e.g. 'add host hostname 192.168.11.1' | ||
+ | |||
+ | Then each port that is to be used needs to be configured ... | ||
+ | |||
+ | e.g. 'set line 1 service silent raw hostname 10000' | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ===== Hookup to a temperature sensor ===== | ||
+ | |||
+ | Thinking of hooking up a DS1820 temperature kit via the Perle box. This [[http:// | ||
+ | kit]] looks good. However, it seems to source its power directly from the RS232 port. Can the Perle box supply sufficient current? Can't find anything in the Perle documentation re the hardware specs for the ports. | ||
+ | |||
+ | ===== Links ===== | ||
+ | |||
+ | DB9 female to RJ45 female adaptors - [[http:// | ||
+ | |||
+ | {{tag> | ||
+ | |||
+ | |||
+ | |||