cybiko:h8portmap

Cybiko Port Map - using H8S 2241

Lifted and amended from http://sourceforge.net/docman/display_doc.php?docid=22647&group_id=88298

To access these ports using bytecode see RegisterAccess

Port 1 is an 8-bit I/O port. Port 1 pins also function as TPU I/O pins (TCLKA, TCLKB, TCLKC, TCLKD, TIOCA0, TIOCB0, TIOCC0, TIOCD0, TIOCA1, TIOCB1, TIOCA2, and TIOCB2) and an address bus output function. Port 1 pin functions change according to the operating mode.

Name R/W Address
Data direction register W 0xFEB0
Data register R/W 0xFF60
Read R 0xFF50
7 - TIOCB2 - Exp Port 54 - CS for serial EEPROM 
6 - TIOCA2 - vibrator 
5 - TIOCB1 - speaker 
4 - TIOCA1 - Exp Port 53 - CS for serial EEPROM 
3 - TIOCD0 - NC 
2 - TIOCC0 - +3.3v 
1 - TIOCB0 - Exp Port 50 
0 - TIOCA0 - Exp Port 59 

Port 2 is an 8-bit I/O port. Port 2 pins also function as 8-bit timer I/O pins (TMRI0, TMCI0, TMO0, TMRI1, TMCI1, and TMO1). Port 2 pin functions are the same in all operating modes. Port 2 uses Schmitt-triggered input.

Name R/W Address
Data direction register W 0xFEB1
Data register R/W 0xFF61
Read R 0xFF51
7 - TMO1  - Exp Port 55 - serial clock 
6 - TMO0  - Reset Atmel uC - Active Low 
5 - TMCI1 - NC 
4 - TMRI1 - Powerdown RF LMX2315 - Active Low 
3 - TMCI0 - Green Led - Active High 
2 - TMRI0 - Red Led - Active High 
1 - P21   - Exp Port 44 - chip select? 
0 - P20   - NC 

Port 3 is a 6-bit I/O port. Port 3 pins also function as SCI I/O pins (TxD0, RxD0, SCK0, TxD1, RxD1, and SCK1) and interrupt input pins (IRQ4, IRQ5). Port 3 pin functions are the same in all operating modes. The interrupt input pins (IRQ4, IRQ5) are Schmitt-triggered inputs.

Name R/W Address
Data direction register W 0xFEB2
Data register R/W 0xFF62
Read R 0xFF52
Open drain control Reg R 0xFF76
5 - SCK1 - clock Exp Port 
4 - SCK0 - CEF - Exp Port 
3 - RXD1 - Exp Port: Dout 
2 - RXD0 - Receive from Atmel (RF) 
1 - TXD1 - Exp Port: Din 
0 - TXD0 - Transmit toward Atmel (RF)  

Port 4 is an 8-bit input-only port. Port 4 pins also function as A/D converter analog input pins (AN0 to AN3). Port 4 pin functions are the same in all operating modes. Figure 8-4 shows the port 4 pin configuration.

Name R/W Address
Read R 0xFF53
3 - AN3 - NC
2 - AN2 - battery level
1 - AN1 - battery level
0 - AN0 - RF Signal Strength 

Port 5 is a 4-bit I/O port. Port 5 pins also function as SCI I/O pins (TxD2, RxD2, and SCK2). Port 5 pin functions are the same in all operating modes. Figure 8-5 shows the port 5 pin configuration.

Name R/W Address
Data direction register W 0xFEB4
Data register R/W 0xFF64
Read R 0xFF54
3 - P53  - Charge circuitry enable - Active High
2 - SCK2 - NC 
1 - RXD2 - RS232 receive 
0 - TXD2 - RS232 transmit 

Port A - address lines A19 - A16
Port B - Address lines A15 - A8
Port C - Address lines A7 - A0
Port D - Data lines D15 - D8
Port E - Data lines D7 - D0

Port F is an 8-bit I/O port. Port F pins also function as bus control signal input/output pins (AS, RD, HWR, LWR, WAIT, BREQO, BREQ, and BACK), the system clock (ΓΈ) output pin and interrupt input pins (IRQ0 to IRQ3). The interrupt input pins (IRQ0 to IRQ3) are Schmitt-triggered inputs.

Name R/W Address
Data direction register W 0xFEBE
Data register R/W 0xFF6E
Read R 0xFF5E
7 - F0 -  NC 
6 - AS# - NC 
5 - RD# - read enable - Active Low 
4 - HWR# - write enable - Active Low 
3 - IRQ3/LWR# - NC 
2 - IRQ2 - R_BF - ready line 
1 - IRQ1# - SCL - Real Time Clock - clock 
0 - IRQ0# - SDA - Real Time Clock - data 

Port G is a 5-bit I/O port. Port G pins also function as bus control signal output pins (CS0 to CS3). The A/D converter input pin (ADTRG), and interrupt input pins (IRQ6, IRQ7). The interrupt input pins (IRQ6, IRQ7) are Schmitt-triggered inputs.

Name R/W Address
Data direction register W 0xFEBF
Data register R/W 0xFF6F
Read R 0xFF5F
4 - CS0#  - NC 
3 - CS1#  - Ram Chip Enable 
2 - CS2#  - Expansion Enable 
1 - CS3#  - LCD Enable 
0 - IRQ6# - NC 
  • cybiko/h8portmap.txt
  • Last modified: 2009/11/27 17:54
  • by 127.0.0.1