Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== IBM x330 eServer xSeries 330 ====== Tested and working system. [[http://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-4PQFST&brandind=5000008|Hardware Maintenance Manual]] {{:ebay:sales:cimg2261b.jpg?640}} {{:ebay:sales:cimg2271a.jpg}} || **CPU 1** || Intel(R) Pentium(R) III (Coppermine) 1GHz || || **CPU 2** || Intel(R) Pentium(R) III (Coppermine) 1GHz || || **L2 Cache** || 256kb per CPU || || **LAN Adapter** || IBM Dual Onboard Intel 82557 Ethernet Adapter || || **RAM** || 1768Mb || || **Hard disk drive** || IBM 72.6Gb 10,000RPM Ultra3 SCSI drive; in a removable caddy || || **Host Bus Adapter** || Adaptec Integrated AIC-7892 ; Ultra3/Ultra160M SCSI\\ IBM 00N6881 Netfinity FastT Host Adapter \\ 37L6889 IBM Netfinity SereRAID 4-H Ultra160 SCSI Adapter (4-Channel) \\ IBM Integrated Enhanced IDE Busmaster Ultra DMA/33 (ATA-33) \\ IBM Intergrated Enhanced IDE Busmaster Ultra DMA/33 (ATA-33) || || **Video** || VGA compatible controller: S3 Inc. Savage 4 (rev 06) || || **Floppy Type** || 1.44Mb || || **CD-ROM Drive** || IBM IDE CDROM 24x max Slim || {{cimg2269.jpg?640}} See also [[blog/using_an_x330_without_a_c2t_cable]] <code> processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 996.894 cache size : 256 KB physical id : 0 siblings : 1 runqueue : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1985.74 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 996.894 cache size : 256 KB physical id : 0 siblings : 1 runqueue : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1992.29 Linux version 2.4.21-50.ELsmp (centos@sillage.bis.pasteur.fr) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-56)) #1 SMP Mon Jun 11 18:13:29 EDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000006ffec340 (usable) BIOS-e820: 000000006ffec340 - 000000006fff0000 (ACPI data) BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 895MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 0009e1d0 hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. hm, page 0009e000 reserved twice. hm, page 0009f000 reserved twice. NX protection not present; using segment protection On node 0 totalpages: 458732 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 229356 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000 Processor #3 Pentium(tm) Pro APIC version 17 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #14 Version 17 at 0xFEC00000. I/O APIC #13 Version 17 at 0xFEC01000. Processors: 2 xAPIC support is not present Enabling APIC mode: Flat. Using 2 I/O APICs IBM machine detected. Enabling interrupts during APM calls. Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.21-50.ELsmp root=LABEL=/ Initializing CPU#0 Detected 996.894 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1985.74 BogoMIPS Page-cache hash table entries: 524288 (order: 9, 2048 KB) Page-pin hash table entries: 131072 (order: 7, 512 KB) Dentry cache hash table entries: 262144 (order: 9, 2048 KB) Inode cache hash table entries: 131072 (order: 8, 1024 KB) Buffer cache hash table entries: 131072 (order: 7, 512 KB) Memory: 1792360k/1834928k available (1731k kernel code, 37948k reserved, 1304k data, 228k init, 917424k highmem) Mount cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I-cache: 16K, L1 D-cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I-cache: 16K, L1 D-cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU0: Intel Pentium III (Coppermine) stepping 06 per-CPU timeslice cutoff: 731.68 usecs. task migration cache decay timeout: 10 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/0 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 1992.29 BogoMIPS CPU: L1 I-cache: 16K, L1 D-cache: 16K CPU: L2 cache: 256K Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff 00000000 00000000 00000000 CPU: Common caps: 0383fbff 00000000 00000000 00000000 CPU1: Intel Pentium III (Coppermine) stepping 06 Total of 2 processors activated (3978.03 BogoMIPS). apic 0 pin 9 is an SMI pin! ENABLING IO-APIC IRQs Setting 14 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 14 ... ok. Setting 13 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 13 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 14-0, 14-2, 14-3, 14-9, 14-10, 14-11, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-10, 13-13, 13-14, 13-15 not connected. ..TIMER: vector=0x31 pin1=-1 pin2=-1 ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. number of MP IRQ sources: 13. number of IO-APIC #14 registers: 16. number of IO-APIC #13 registers: 16. testing the IO APIC....................... IO APIC #14...... .... register #00: 0E000000 ....... : physical APIC id: 0E ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0E000000 ....... : arbitration: 0E .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 003 03 0 0 0 0 0 1 1 41 05 003 03 1 1 0 1 0 1 1 49 06 003 03 0 0 0 0 0 1 1 51 07 003 03 1 1 0 1 0 1 1 59 08 003 03 0 0 0 0 0 1 1 61 09 032 02 1 0 0 0 0 0 2 E1 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 IO APIC #13...... .... register #00: 0D000000 ....... : physical APIC id: 0D ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 0D000000 ....... : arbitration: 0D .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 003 03 1 1 0 1 0 1 1 89 0a 000 00 1 0 0 0 0 0 0 00 0b 003 03 1 1 0 1 0 1 1 91 0c 003 03 1 1 0 1 0 1 1 99 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ25 -> 1:9 IRQ27 -> 1:11 IRQ28 -> 1:12 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 996.9146 MHz. ..... host bus clock speed is 132.9217 MHz. cpu: 0, clocks: 1329217, slice: 443072 CPU0<T0:1329216,T1:886144,D:0,S:443072,C:1329217> cpu: 1, clocks: 1329217, slice: 443072 CPU1<T0:1329216,T1:443072,D:0,S:443072,C:1329217> zapping low mappings. Process timing init...done. Starting migration thread for cpu 0 Starting migration thread for cpu 1 PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Scanning bus 01 from mptable PCI->APIC IRQ transform: (B0,I2,P0) -> 27 PCI->APIC IRQ transform: (B0,I10,P0) -> 25 PCI->APIC IRQ transform: (B0,I15,P0) -> 7 PCI->APIC IRQ transform: (B1,I3,P0) -> 28 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Total HugeTLB memory allocated, 0 Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 114683 aio_setup: sizeof(struct page) = 60 Hugetlbfs mounted. Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e NET4: Frame Diverter 0.46 RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller at PCI slot 00:0f.1 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA hda: CRN-8241B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-floppy driver 0.99.newide ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 524288 bind 65536) Linux IP multicast router 0.06 plus PIM-SM Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 311k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec aic7892 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue f792fe18, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) Vendor: COMPAQ Model: BD07264546 Rev: B20B Type: Direct-Access ANSI SCSI revision: 02 blk: queue f792fc18, I/O limit 4095Mb (mask 0xffffffff) Vendor: IBM Model: FTlV1 S2 Rev: 0 Type: Processor ANSI SCSI revision: 02 blk: queue f7933018, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 142264000 512-byte hdwr sectors (72839 MB) Partition check: sda: sda1 sda2 sda3 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 228k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf88a3000, IRQ 7 usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal hub.c: new USB device 00:0f.2-2, assigned address 2 input0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb1:2.0 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 2040244k swap-space (priority -1) IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com> microcode: CPU0 already at revision 0x8 (current=0x8) microcode: CPU1 already at revision 0x8 (current=0x8) microcode: No suitable data for cpu 1 microcode: No suitable data for cpu 0 Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0, type 3 inserting floppy driver for 2.4.21-50.ELsmp Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xfeb7f000, irq 27, MAC addr 00:06:29:1F:72:2D divert: allocating divert_blk for eth1 e100: eth1: e100_probe: addr 0xfeb7e000, irq 25, MAC addr 00:06:29:1F:72:2E divert: freeing divert_blk for eth0 divert: freeing divert_blk for eth1 ip_tables: (C) 2000-2002 Netfilter core team e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation divert: allocating divert_blk for eth0 e100: eth0: e100_probe: addr 0xfeb7f000, irq 27, MAC addr 00:06:29:1F:72:2D divert: allocating divert_blk for eth1 e100: eth1: e100_probe: addr 0xfeb7e000, irq 25, MAC addr 00:06:29:1F:72:2E ip_tables: (C) 2000-2002 Netfilter core team e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex lp: driver loaded but no devices found usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 audit subsystem ver 0.1 initialized </code> ebay/sales/x330_2.txt Last modified: 2010/04/28 19:49by 127.0.0.1