This shows you the differences between two versions of the page.
Next revision | Previous revision |
livebox:buildingfirmware [2011/12/05 14:09] – external edit 127.0.0.1 | livebox:buildingfirmware [2012/05/10 07:47] (current) – [Assembling new Firmware (create DWB)] minerva9 |
---|
</code> | </code> |
| |
Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn't work. The <note tip>RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#replacing_the_redboot_loader|Replacing the RedBoot loader]]</note> | Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn't work. <note tip>The RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#replacing_the_redboot_loader|Replacing the RedBoot loader]]</note> |
==== Importing a new CRAMFS ==== | ==== Importing a new CRAMFS ==== |
<code> | <code> |
This allows a [[firmware#tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier) to flash, verify and execute successfully. You can also use the [[http://www.dbzoo.com/livebox/firmware#using_the_windows_utility|Windows tool]] to do the same job | This allows a [[firmware#tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier) to flash, verify and execute successfully. You can also use the [[http://www.dbzoo.com/livebox/firmware#using_the_windows_utility|Windows tool]] to do the same job |
| |
You can find the pre-built HAH .DWB image on the [[livebox/hah|HAH Project]] page. Do note that once you have the HAH firmware image onboard, you need to have a DHCP server on your network. Most folks just use the one that is built in to their internet router. | ==== Migrating to the HAH firmware? ==== |
| |
| Now you have done this you can proceed to replace the inventel 5.04 firmware with the HAH firmware.\\ |
| Head back to [[firmware]] for instructions, you are now on step 4. |
| |
====== Reading Redboot config ====== | ====== Reading Redboot config ====== |