Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
livebox:buildingfirmware [2012/04/27 15:59]
brett [Replacing the RedBoot loader]
livebox:buildingfirmware [2012/05/10 07:47] (current)
minerva9 [Assembling new Firmware (create DWB)]
Line 153: Line 153:
 </​code>​ </​code>​
  
-Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn'​t work. The <note tip>​RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#​replacing_the_redboot_loader|Replacing the RedBoot loader]]</​note>​ +Unfortunately pushing this into the TFTP area and setting up the appropriate link doesn'​t work.  <note tip>The RedBoot needs to be reflashed to tell it not to verify the CRYPTO.\\ see [[#​replacing_the_redboot_loader|Replacing the RedBoot loader]]</​note>​
 ==== Importing a new CRAMFS ==== ==== Importing a new CRAMFS ====
 <​code>​ <​code>​
Line 232: Line 231:
  
 This allows a [[firmware#​tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier) ​ to flash, verify and execute successfully. You can also use the [[http://​www.dbzoo.com/​livebox/​firmware#​using_the_windows_utility|Windows tool]] to do the same job  This allows a [[firmware#​tftp_server_for_image_downloads]] of a .DWB modified image (that was generated using the **dwbtool** earlier) ​ to flash, verify and execute successfully. You can also use the [[http://​www.dbzoo.com/​livebox/​firmware#​using_the_windows_utility|Windows tool]] to do the same job 
- 
-You can find the pre-built HAH .DWB image on the [[livebox/​hah|HAH Project]] page. Do note that once you have the HAH firmware image onboard, you need to have a DHCP server on your network. Most folks just use the one that is built in to their internet router. 
  
 ==== Migrating to the HAH firmware? ==== ==== Migrating to the HAH firmware? ====
  
-Now you have done this you can proceed to replace the inventel 5.04 firmware with the HAH firmware. +Now you have done this you can proceed to replace the inventel 5.04 firmware with the HAH firmware.\\ 
-Head back to [[firmware]] for instructions.+Head back to [[firmware]] for instructions, you are now on step 4. 
 ====== Reading Redboot config ====== ====== Reading Redboot config ======