Differences

This shows you the differences between two versions of the page.

--- livebox:sms [2012/05/18 23:58] – brett
+++ livebox:sms [2014/06/08 10:35] – minerva9
@@ Line 9: / Line 9: @@
 Connecting the phone to the Livebox will requires a [[http://www.homeautomationhub.com/content/dlr3-connect-cable|DLR-3 cable]] and a USB/Serial cable.
-Note that xap-sms connects at 19200baud.
+Note that xap-sms connects at 19200 baud.
 The command line options:
@@ Line 60: / Line 60: @@
 </code>
-There are three configuration parameters in ///etc/xap-livebox.ini// that xap-sms honours.  Whether the daemon should be started or not and the USB serial device where the phone can be found.  These can also be updated via the WEB interface.
+There are three configuration parameters in ///etc/xap-livebox.ini// that xap-sms honours.  Whether the daemon should be started or not, the USB serial device where the phone can be found and the baud rate for the serial comms.  These can also be updated via the HAH web interface.
 <code>