IBM x330 eServer xSeries 330

Tested and working systems. Hardware Maintenance Manual

See also using_an_x330_without_a_c2t_cable

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 11
model name      : Intel(R) Pentium(R) III CPU family      1133MHz
stepping        : 1
cpu MHz         : 1128.633
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips        : 2254.43

Linux version 2.4.21-50.EL (centos@sillage.bis.pasteur.fr) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-56)) #1 Mon Jun 11 18:22:02 EDT 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bffec340 (usable)
 BIOS-e820: 00000000bffec340 - 00000000bfff0000 (ACPI data)
 BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
2175MB HIGHMEM available.
896MB LOWMEM available.
NX protection not present; using segment protection
On node 0 totalpages: 786412
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 557036 pages.
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.21-50.EL root=LABEL=/
Initializing CPU#0
Detected 1128.633 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2254.43 BogoMIPS
Page-cache hash table entries: 1048576 (order: 10, 4096 KB)
Page-pin hash table entries: 262144 (order: 8, 1024 KB)
Dentry cache hash table entries: 524288 (order: 10, 4096 KB)
Inode cache hash table entries: 262144 (order: 9, 2048 KB)
Buffer cache hash table entries: 262144 (order: 8, 1024 KB)
Memory: 3081848k/3145648k available (1552k kernel code, 59184k reserved, 1075k data, 164k init, 2228144k highmem)
zapping low mappings.
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I-cache: 16K, L1 D-cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
CPU:             Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III CPU family      1133MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Process timing init...done.
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 01
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 196603
aio_setup: sizeof(struct page) = 56
Hugetlbfs mounted.
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
hda: OIP-SD2400A/BM, ATAPI CD/DVD-ROM drive
hdc: IC35L090AVV207-0, ATA DISK drive
blk: queue c041de4c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: attached ide-disk driver.
hdc: host protected area => 1
hdc: 156312576 sectors (80032 MB) w/1821KiB Cache, CHS=9730/255/63, (U)DMA
ide-floppy driver 0.99.newide
Partition check:
 hdc: hdc1 hdc2 hdc3
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 304k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
        <Adaptec aic7892 Ultra160 SCSI adapter>
        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

blk: queue c5c39614, I/O limit 4095Mb (mask 0xffffffff)
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 164k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf889e000, IRQ 7
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,2), internal journal
hub.c: new USB device 00:0f.2-1, assigned address 2
input0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb1:2.0
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 2040244k swap-space (priority -1)
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
microcode: CPU0 already at revision 0x1c (current=0x1c)
microcode: No suitable data for cpu 0
inserting floppy driver for 2.4.21-50.EL
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfeb7f000, irq 10, MAC addr 00:02:55:C6:99:EA
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfeb7e000, irq 11, MAC addr 00:02:55:C6:99:EB
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:05.0: 3Com PCI 3c980C Python-T at 0x2280. Vers LK1.1.18
divert: allocating divert_blk for eth2
01:06.0: 3Com PCI 3c980C Python-T at 0x2400. Vers LK1.1.18
divert: allocating divert_blk for eth3
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
divert: freeing divert_blk for eth2
divert: freeing divert_blk for eth3
ip_tables: (C) 2000-2002 Netfilter core team
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfeb7f000, irq 10, MAC addr 00:02:55:C6:99:EA
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfeb7e000, irq 11, MAC addr 00:02:55:C6:99:EB
ip_tables: (C) 2000-2002 Netfilter core team
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
01:05.0: 3Com PCI 3c980C Python-T at 0x2280. Vers LK1.1.18
divert: allocating divert_blk for eth2
01:06.0: 3Com PCI 3c980C Python-T at 0x2400. Vers LK1.1.18
divert: allocating divert_blk for eth3
lp: driver loaded but no devices found
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
audit subsystem ver 0.1 initialized
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex

/dev/hdc:

 Model=IC35L090AVV207-0, FwRev=V23OA66A, SerialNo=VNVC02G3DXYJ1T
 Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52
 BuffType=DualPortCache, BuffSize=1821kB, MaxMultSect=16, MultSect=16
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156312576
 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
 AdvancedPM=yes: disabled (255) WriteCache=disabled
 Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:

 * signifies the current active mode