Differences

This shows you the differences between two versions of the page.

--- livebox:firmware [2012/04/27 16:20] – [Setup firmware] brett
+++ livebox:firmware [2012/04/27 16:46] – [Flashing the HAH firmware] brett
@@ Line 17: / Line 17: @@
 Do note that once you have the HAH firmware image on-board, you need to have a DHCP server on your network.  So you need to plug your HAH livebox back into your LAN.  To help you locate your HAH's DHCP assigned IP address see [[hah_installation#Locating DHCP assigned IP]].
+Once the firmware is installed the following points will useful:
+  * Default root password is admin
+  * SSH enabled port 22, No telnet access.
+  * Webserver listens on port 80.
+  * Serial console login disabled.
 ====== Flashing new firmware aka Livebox Recovery ======