livebox:firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
livebox:firmware [2012/04/27 16:20] – [Setup firmware] brettlivebox:firmware [2012/04/27 16:47] – [Flashing the HAH firmware] brett
Line 18: Line 18:
 Do note that once you have the HAH firmware image on-board, you need to have a DHCP server on your network.  So you need to plug your HAH livebox back into your LAN.  To help you locate your HAH's DHCP assigned IP address see [[hah_installation#Locating DHCP assigned IP]]. Do note that once you have the HAH firmware image on-board, you need to have a DHCP server on your network.  So you need to plug your HAH livebox back into your LAN.  To help you locate your HAH's DHCP assigned IP address see [[hah_installation#Locating DHCP assigned IP]].
  
 +Once the firmware is installed the following points will useful:
 +  * Default root password is admin
 +  * SSH enabled port 22, No telnet access.
 +  * Webserver listens on port 80.
 +  * Serial console login disabled.
 +
 +Oh and don't forget step 5 - upgrade to the latest.
 ====== Flashing new firmware aka Livebox Recovery ====== ====== Flashing new firmware aka Livebox Recovery ======
  
  • livebox/firmware.txt
  • Last modified: 2015/03/13 04:13
  • by brett