livebox:firmware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
livebox:firmware [2012/04/27 16:46] – [Flashing the HAH firmware] brettlivebox:firmware [2015/03/13 04:13] (current) – Update the location of the HAH firmware brett
Line 14: Line 14:
 ====== Flashing the HAH firmware ====== ====== Flashing the HAH firmware ======
  
-Grab the latest DWB from http://code.google.com/p/livebox-hah/downloads/list and setup just like you do for flashing the uk5.04 firmware.  You are one step away.+Grab the latest DWB from http://homeautomationhub.com/content/livebox-hah-firmware and setup just like you do for flashing the uk5.04 firmware.  You are one step away.
  
-Do note that once you have the HAH firmware image on-boardyou need to have a DHCP server on your network.  So you need to plug your HAH livebox back into your LAN.  To help you locate your HAH's DHCP assigned IP address see [[hah_installation#Locating DHCP assigned IP]].+Once you have the HAH firmware image on-board you need to have a DHCP server on your network for it to obtain an IP address.  Plug your HAH livebox back into your LAN and reboot it.  To help you locate your HAH's DHCP assigned IP address see [[hah_installation#Locating DHCP assigned IP]].
  
 Once the firmware is installed the following points will useful: Once the firmware is installed the following points will useful:
Line 24: Line 24:
   * Serial console login disabled.   * Serial console login disabled.
  
 +Oh and don't forget step 5 - upgrade to the latest.
 ====== Flashing new firmware aka Livebox Recovery ====== ====== Flashing new firmware aka Livebox Recovery ======
  
  • livebox/firmware.1335545184.txt.gz
  • Last modified: 2012/04/27 16:46
  • by brett