Differences

This shows you the differences between two versions of the page.

--- livebox:hah_hahnode:roomnode [2014/01/20 08:59] – created brett
+++ livebox:hah_hahnode:roomnode [2014/01/20 09:00] (current) – [Room Node Twin] brett
@@ Line 1: / Line 1: @@
-===== Room Node Twin =====
+====== Room Node ======
-Identical to Room Node but has an additional 1wire sensor for Temperature on JeePort2 (PD.5) See [[#nodule_io_pins]] for wiring.
-Exposes the additional endpoint
-  * temp2 - Temperature
-<code>
-RoomNodeTwin = require("xap.roomnodetwin").RoomNode
-[3] = RoomNodeTwin{instance="jeenode:3", endpoints={temp=1,temp2=1}, ttl=900},
-</code>
-This Decoder and Sketch is handy if you have Node in a room with temp sensor on an extension cable and want to monitor another room, an heating/air conditioning duct output for the room or simple a sensor outside the window.
-{{:livebox:cimg3892.jpg|}}
-===== Room Node =====
 {{ :livebox:hah_hahnode:6929394483_150611e518_q.jpg}}
@@ Line 63: / Line 46: @@
 {{:livebox:p1000678m.jpg|}}
+====== Room Node Twin ======
+Identical to Room Node but has an additional 1wire sensor for Temperature on JeePort2 (PD.5) See [[#nodule_io_pins]] for wiring.
+Exposes the additional endpoint
+  * temp2 - Temperature
+<code>
+RoomNodeTwin = require("xap.roomnodetwin")
+[3] = RoomNodeTwin{instance="jeenode:3", endpoints={temp=1,temp2=1}, ttl=900},
+</code>
+This Decoder and Sketch is handy if you have Node in a room with temp sensor on an extension cable and want to monitor another room, an heating/air conditioning duct output for the room or simple a sensor outside the window.
+{{:livebox:cimg3892.jpg|}}