This is an old revision of the document!
These instructions will enable you to get a command line prompt on your joggler using O2 firmware.
Step 1. download ubuntu image and write it to a USB pendrive
- uncompress the GZ file - http://www.7-zip.org/
- Use Win32DiskImager.exe to write the image.
Step 2. Booting and enabling telnetd
- Plug in a USB HUB to your joggler and into this the USB stick with Ubuntu and a USB keyboard.
- Switch on your joggler and wait for the console login prompt.
- Login to Ubuntu mount the O2 firmware and enable the telnetd daemon
login: joggler password: joggler sudo su mount /dev/mmcblk0p2 /mnt /mnt/sbin/nvram -w net.login=YES umount /mnt
Step 3. Enable SSHD
Trying 192.168.1.117... Connected to dhcp-192-168-1-117.local (192.168.1.117). Escape character is '^]'. atom login: root OpenPeak Atom BSP ("Frame") Copyright(C) 2008 OpenPeak, Inc. All rights reserved. #
Now that you are in you can setup SSHD
cd /tmp wget http://www.dbzoo.com/joggler/breakin wget http://www.dbzoo.com/joggler/payload.tgz chmod 777 breakin ./breakin