IBM x330 eServer xSeries 330
Tested and working system. Hardware Maintenance Manual
| CPU 1 | Intel(R) Pentium(R) III (Coppermine) 1GHz | ||
| CPU 2 | Intel(R) Pentium(R) III (Coppermine) 1GHz | ||
| L2 Cache | 256kb per CPU | ||
| LAN Adapter | IBM Dual Onboard Intel 82557 Ethernet Adapter | ||
| RAM | 1768Mb | ||
| Hard disk drive | IBM 72.6Gb 10,000RPM Ultra3 SCSI drive; in a removable caddy | ||
| Host Bus Adapter | Adaptec Integrated AIC-7892 ; Ultra3/Ultra160M SCSI IBM 00N6881 Netfinity FastT Host Adapter 37L6889 IBM Netfinity SereRAID 4-H Ultra160 SCSI Adapter (4-Channel) IBM Integrated Enhanced IDE Busmaster Ultra DMA/33 (ATA-33) IBM Intergrated Enhanced IDE Busmaster Ultra DMA/33 (ATA-33) |
||
| Video | VGA compatible controller: S3 Inc. Savage 4 (rev 06) | ||
| Floppy Type | 1.44Mb | ||
| CD-ROM Drive | IBM IDE CDROM 24x max Slim |
See also using_an_x330_without_a_c2t_cable
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 996.894
cache size : 256 KB
physical id : 0
siblings : 1
runqueue : 0
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1985.74
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 996.894
cache size : 256 KB
physical id : 0
siblings : 1
runqueue : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse
bogomips : 1992.29
Linux version 2.4.21-50.ELsmp (centos@sillage.bis.pasteur.fr) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-56)) #1 SMP Mon Jun 11 18:13:29 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000006ffec340 (usable)
BIOS-e820: 000000006ffec340 - 000000006fff0000 (ACPI data)
BIOS-e820: 000000006fff0000 - 0000000070000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
895MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009e1d0
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009f000 reserved twice.
NX protection not present; using segment protection
On node 0 totalpages: 458732
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 229356 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: IBM ENSW Product ID: NF 4100R SMP APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #14 Version 17 at 0xFEC00000.
I/O APIC #13 Version 17 at 0xFEC01000.
Processors: 2
xAPIC support is not present
Enabling APIC mode: Flat. Using 2 I/O APICs
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: auto BOOT_IMAGE=linux ro BOOT_FILE=/boot/vmlinuz-2.4.21-50.ELsmp root=LABEL=/
Initializing CPU#0
Detected 996.894 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Page-cache hash table entries: 524288 (order: 9, 2048 KB)
Page-pin hash table entries: 131072 (order: 7, 512 KB)
Dentry cache hash table entries: 262144 (order: 9, 2048 KB)
Inode cache hash table entries: 131072 (order: 8, 1024 KB)
Buffer cache hash table entries: 131072 (order: 7, 512 KB)
Memory: 1792360k/1834928k available (1731k kernel code, 37948k reserved, 1304k data, 228k init, 917424k highmem)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: L1 I-cache: 16K, L1 D-cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: L1 I-cache: 16K, L1 D-cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 06
per-CPU timeslice cutoff: 731.68 usecs.
task migration cache decay timeout: 10 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1992.29 BogoMIPS
CPU: L1 I-cache: 16K, L1 D-cache: 16K
CPU: L2 cache: 256K
Intel machine check reporting enabled on CPU#1.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU1: Intel Pentium III (Coppermine) stepping 06
Total of 2 processors activated (3978.03 BogoMIPS).
apic 0 pin 9 is an SMI pin!
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 14-0, 14-2, 14-3, 14-9, 14-10, 14-11, 13-0, 13-1, 13-2, 13-3, 13-4, 13-5, 13-6, 13-7, 13-8, 13-10, 13-13, 13-14, 13-15 not connected.
..TIMER: vector=0x31 pin1=-1 pin2=-1
...trying to set up timer (IRQ0) through the 8259A ... failed.
...trying to set up timer as Virtual Wire IRQ... works.
number of MP IRQ sources: 13.
number of IO-APIC #14 registers: 16.
number of IO-APIC #13 registers: 16.
testing the IO APIC.......................
IO APIC #14......
.... register #00: 0E000000
....... : physical APIC id: 0E
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0E000000
....... : arbitration: 0E
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 003 03 0 0 0 0 0 1 1 39
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 003 03 0 0 0 0 0 1 1 41
05 003 03 1 1 0 1 0 1 1 49
06 003 03 0 0 0 0 0 1 1 51
07 003 03 1 1 0 1 0 1 1 59
08 003 03 0 0 0 0 0 1 1 61
09 032 02 1 0 0 0 0 0 2 E1
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 003 03 0 0 0 0 0 1 1 69
0d 003 03 0 0 0 0 0 1 1 71
0e 003 03 0 0 0 0 0 1 1 79
0f 003 03 0 0 0 0 0 1 1 81
IO APIC #13......
.... register #00: 0D000000
....... : physical APIC id: 0D
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 0D000000
....... : arbitration: 0D
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 003 03 1 1 0 1 0 1 1 89
0a 000 00 1 0 0 0 0 0 0 00
0b 003 03 1 1 0 1 0 1 1 91
0c 003 03 1 1 0 1 0 1 1 99
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ1 -> 0:1
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ25 -> 1:9
IRQ27 -> 1:11
IRQ28 -> 1:12
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 996.9146 MHz.
..... host bus clock speed is 132.9217 MHz.
cpu: 0, clocks: 1329217, slice: 443072
CPU0<T0:1329216,T1:886144,D:0,S:443072,C:1329217>
cpu: 1, clocks: 1329217, slice: 443072
CPU1<T0:1329216,T1:443072,D:0,S:443072,C:1329217>
zapping low mappings.
Process timing init...done.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
PCI: PCI BIOS revision 2.10 entry at 0xfd61c, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Scanning bus 01 from mptable
PCI->APIC IRQ transform: (B0,I2,P0) -> 27
PCI->APIC IRQ transform: (B0,I10,P0) -> 25
PCI->APIC IRQ transform: (B0,I15,P0) -> 7
PCI->APIC IRQ transform: (B1,I3,P0) -> 28
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 114683
aio_setup: sizeof(struct page) = 60
Hugetlbfs mounted.
Detected PS/2 Mouse Port.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA
hda: CRN-8241B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 311k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7892 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
blk: queue f792fe18, I/O limit 4095Mb (mask 0xffffffff)
(scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
Vendor: COMPAQ Model: BD07264546 Rev: B20B
Type: Direct-Access ANSI SCSI revision: 02
blk: queue f792fc18, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBM Model: FTlV1 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
blk: queue f7933018, I/O limit 4095Mb (mask 0xffffffff)
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sda: 142264000 512-byte hdwr sectors (72839 MB)
Partition check:
sda: sda1 sda2 sda3
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 228k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xf88a3000, IRQ 7
usb-ohci.c: usb-00:0f.2, ServerWorks OSB4/CSB5 OHCI USB Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal
hub.c: new USB device 00:0f.2-2, assigned address 2
input0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb1:2.0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 2040244k swap-space (priority -1)
IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
microcode: CPU0 already at revision 0x8 (current=0x8)
microcode: CPU1 already at revision 0x8 (current=0x8)
microcode: No suitable data for cpu 1
microcode: No suitable data for cpu 0
Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0, type 3
inserting floppy driver for 2.4.21-50.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfeb7f000, irq 27, MAC addr 00:06:29:1F:72:2D
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfeb7e000, irq 25, MAC addr 00:06:29:1F:72:2E
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
divert: allocating divert_blk for eth0
e100: eth0: e100_probe: addr 0xfeb7f000, irq 27, MAC addr 00:06:29:1F:72:2D
divert: allocating divert_blk for eth1
e100: eth1: e100_probe: addr 0xfeb7e000, irq 25, MAC addr 00:06:29:1F:72:2E
ip_tables: (C) 2000-2002 Netfilter core team
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
lp: driver loaded but no devices found
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
audit subsystem ver 0.1 initialized